The SMC Rescue Swivel is built around a heat-treated steel axle and a sealed high efficiency ball-bearing to ensure flawless rotation during even prolonged and difficult raises in severe rock, mountain and rescue conditions. The holes are sized to work with rescue carabiners, and allow carabiner lock sleeves to pass through without hanging up. As one of the most compact swivels on the market, it is ideal for confined space rescue and other awkward hauling situations. The sides are smooth and rounded, helping to prevent hanging up on rocks, litters, or other components or structures. All SMC NFPA products are third party tested (by Underwriters Laboratories - UL) as required by NFPA 1983 (2012 edition) standards.

The Micro U-Rack provide even distribution of weight between both sides of the rack, does not twist rope, as can occur when using a Figure 8 type descender and may be used with single ropes of varying diameters without the loss of friction or control under varying weights and applications

The SMC Rappel Rack Frame is available in two eye configurations: conventional or with the eye twisted 90 degrees for correct rack orientation on a horizontal harness clip-in point, as is typical with most rescue harnesses. All the welding on this rack was done by certified aircraft welders.

The SMC Rappel Rack Frame is available in two eye configurations: conventional or with the eye twisted 90 degrees for correct rack orientation on a horizontal harness clip-in point as is typical with most rescue harnesses. All the welding on this rack was done by certified aircraft welders.

The SMC Rappel Rack Frame is available in two eye configurations: conventional or with the eye twisted 90 degrees for correct rack orientation on a horizontal harness clip-in point as is typical with most rescue harnesses. All the welding on this rack was done by certified aircraft welders.

With the possible exception of rope it can be argued that a pulley is one of the most important components used in all forms of rescue as well as wilderness and alpine exploration. Noting the unique requirements found in Swift Water Rescue, we created an entirely new pulley to address those needs. The Swiftwater fits between our Micro PMP and 3- PMPs in both size and work load, and represents a reasonably priced, non-NFPA alternative to other midsized pulleys.

The SMC U-Rack Frame is available in two sizes allowing for 4 Bar or 6 Bar configurations. Manufactured from Stainless Steel to provide optimal strength for building your own customized Rappel Rack. Just add the bars you desire and you're ready to go.

The SMC JR (Jigger Rescue) and JRB (JR with becket) double prusik minding pulleys have been designed to be compact, lightweight and cost effective. A key component of every rescue technician-s tool box, the JR and JRB pulleys provide tremendous versatility in the minimalist of ways. Couple the JR with a JRB pulley and you have a lightweight mechanical advantage system that can pull duty in rescue roles from litter tilting to piggy back systems.

The SMC U-Rack Frame is available in two sizes allowing for 4 Bar or 6 Bar configurations. Manufactured from Stainless Steel to provide optimal strength for building your own customized Rappel Rack. Just add the bars you desire and you're ready to go.