Micro Rappel Rack
Home / Shop / Work Gear / Work at Height
- Description
- Specifications
The Micro U-Rack provide even distribution of weight between both sides of the rack, does not twist rope, as can occur when using a Figure 8 type descender and may be used with single ropes of varying diameters without the loss of friction or control under varying weights and applications
U-Rack may be used as either a rappel or lowering device.
U-Rack provides for even distribution of weight between both sides of the rack.
U-Rack does not twist rope, as can occur when using a Figure 8 type descender.
U-Rack may be used with single or double ropes of varying diameters.
Different length racks provide wide range of friction and control under varying weights and applications.
User may adjust friction by simply wrapping rope around the Tie-Off Bar(s).
Stainless steel rack material provides greater strength, reliability and long lasting service.
Tie-Off Bars and Brake Bars are tubular stainless steel for longer life.
APPLICATIONS:
Mountaineering
Mountain and Urban Rescue
Caving
Canyoneering
Model #: 13700
Frame Material: Stainless Steel Frame, Stainless Steel Tie-Off Bars & Brake Bars
Brake Bars: Stainless
Tie-off Bars: Stainless
Max. Rope size: - 1/2- (12.5mm)
Dimensions: 8.65" Long
Weight: 16.08 oz (399g)
Made In USA
Related Products
U-Rack Frame Only - 4 Bar
CAD $43.23The SMC U-Rack Frame is available in two sizes allowing for 4 Bar or 6 Bar configurations. Manufactured from Stainless Steel to provide optimal strength for building your own customized Rappel Rack. Just add the bars you desire and you're ready to go.Maximum quantity exceededMinimum purchase amount of 0 is required
U-Rack Frame Only - 6 Bar
CAD $54.82The SMC U-Rack Frame is available in two sizes allowing for 4 Bar or 6 Bar configurations. Manufactured from Stainless Steel to provide optimal strength for building your own customized Rappel Rack. Just add the bars you desire and you're ready to go.Maximum quantity exceededMinimum purchase amount of 0 is required
J Rack Frame Only
CAD $65.04The SMC Rappel Rack Frame is available in two eye configurations: conventional or with the eye twisted 90 degrees for correct rack orientation on a horizontal harness clip-in point as is typical with most rescue harnesses. All the welding on this rack was done by certified aircraft welders.Maximum quantity exceededMinimum purchase amount of 0 is required- ￩￫
Micro Double Aluminum Prusik Minding Pulley "PMP"
CAD $110.70Looking for a well-built, small pulley that has plenty of capacity and performs well- The SMC Micro PMP-s (singles and doubles) are exactly what you need. These are the smallest of three sizes of Prusik Minding Pulleys made by SMC, but don-t let their small size cause you to question their performance! These pulleys are designed and manufactured to the same high quality standards as our full-sized PMP-s.Micro Double Aluminum Prusik Minding Pulley "PMP"
CAD $110.70Successfully Added to your Shopping CartAdding to Cart...
