If you are looking to buy an American-made Stainless Steel Carabiner then you need look no further. SMC-s Stainless Steel Large Locking D Carabiner is manufactured in the same size and shape as our best selling Large Steel Carabiner. When the working environment results in exposure to corrosive elements, and a larger gate opening and higher breaking strength are necessary, the SMC Large Stainless Steel Locking D is the correct choice.

The SMC Rappel Rack Frame is available in two eye configurations: conventional or with the eye twisted 90 degrees for correct rack orientation on a horizontal harness clip-in point, as is typical with most rescue harnesses. All the welding on this rack was done by certified aircraft welders.

Rigging plates are indispensable and help make setting up a rope system quicker and safer. SMC's Rigging Plate is half the size of the bigger plates on the market yet it is just as strong. Features a single, large circular center hole that accepts numerous connections simultaneously plus five oversized, ovalized holes that are each designed to handle up to 2 large rescue. Holes are individually numbered to make it quick and easy to organize connections. All edges on the SMC Rigging Plate have been contoured so that they are easy on rope, webbing, carabiners and other connectors. CNC machined from 1/2'' thick aircraft quality aluminum and then anodized for quick identification and additional resistance to corrosion.

The Russ Anderson/SMC Figure 8 (with ears) is one of the most popular full-sized descenders used by professionals throughout the rescue, fire service, police/tactical and industrial/work related markets. This is the smaller of two sizes of Figure 8 (the other is a non-NFPA model) this model is ideal for working with a single or a double wrap of rope up to 1/2'' in diameter.

The SMC Rappel Rack Frame is available in two eye configurations: conventional or with the eye twisted 90 degrees for correct rack orientation on a horizontal harness clip-in point as is typical with most rescue harnesses. All the welding on this rack was done by certified aircraft welders.

The SMC Rappel Rack Frame is available in two eye configurations: conventional or with the eye twisted 90 degrees for correct rack orientation on a horizontal harness clip-in point as is typical with most rescue harnesses. All the welding on this rack was done by certified aircraft welders.

Heat-treated Large Steel Locking D was created to address the need for a very strong steel carabiner without adding unnecessary weight and size. Built to the same specifications as the standard SMC Large Locking Steel Carabiner and certified by Underwriters Laboratories to meet NFPA -G- General Use standards but with an additional step of heat-treatment in order to provide an incredible 30% greater strength.

With the possible exception of rope it can be argued that a pulley is one of the most important components used in all forms of rescue as well as wilderness and alpine exploration. Noting the unique requirements found in Swift Water Rescue, we created an entirely new pulley to address those needs. The Swiftwater fits between our Micro PMP and 3- PMPs in both size and work load, and represents a reasonably priced, non-NFPA alternative to other midsized pulleys.

Looking for a well-built, small pulley that has plenty of capacity and performs well- The SMC Micro PMP-s (singles and doubles) are exactly what you need. These are the smallest of three sizes of Prusik Minding Pulleys made by SMC, but don-t let their small size cause you to question their performance! These pulleys are designed and manufactured to the same high quality standards as our full-sized PMP-s.

The SMC U-Rack Frame is available in two sizes allowing for 4 Bar or 6 Bar configurations. Manufactured from Stainless Steel to provide optimal strength for building your own customized Rappel Rack. Just add the bars you desire and you're ready to go.