The SMC Rappel Rack Frame is available in two eye configurations: conventional or with the eye twisted 90 degrees for correct rack orientation on a horizontal harness clip-in point as is typical with most rescue harnesses. All the welding on this rack was done by certified aircraft welders.

Heat-treated Large Steel Locking D was created to address the need for a very strong steel carabiner without adding unnecessary weight and size. Built to the same specifications as the standard SMC Large Locking Steel Carabiner and certified by Underwriters Laboratories to meet NFPA -G- General Use standards but with an additional step of heat-treatment in order to provide an incredible 30% greater strength.

With the possible exception of rope it can be argued that a pulley is one of the most important components used in all forms of rescue as well as wilderness and alpine exploration. Noting the unique requirements found in Swift Water Rescue, we created an entirely new pulley to address those needs. The Swiftwater fits between our Micro PMP and 3- PMPs in both size and work load, and represents a reasonably priced, non-NFPA alternative to other midsized pulleys.

Looking for a well-built, small pulley that has plenty of capacity and performs well- The SMC Micro PMP-s (singles and doubles) are exactly what you need. These are the smallest of three sizes of Prusik Minding Pulleys made by SMC, but don-t let their small size cause you to question their performance! These pulleys are designed and manufactured to the same high quality standards as our full-sized PMP-s.

The SMC U-Rack Frame is available in two sizes allowing for 4 Bar or 6 Bar configurations. Manufactured from Stainless Steel to provide optimal strength for building your own customized Rappel Rack. Just add the bars you desire and you're ready to go.

The lightest of our line of rescue descenders, this is a traditional figure 8 design without "ears". Machined from solid aluminum bar, this descender is hard-coat anodized to provide optimal resistance to abrasion and is therefore ideally suited for heavier duty or repetitive rappelling situations. The Figure 8 will accept a variety of rope sizes from 8 mm to 12.5 mm, either single or double.

The SMC FLEX was originally designed for the demanding Technical Fire Rescue market as a canvas replacement. But after using and sharing the FLEX we realized it is much more than just the ultimate in configurable rope management and protection. We realized the FLEX is FLEXible in its uses and the only limitation is your own imagination. The FLEX can be used in a magnitude of configurations providing solutions for an ever growing amount of problems you might face while in the field or around the house. Use a stand alone FLEX or connection multiple FLEX pads with the FLEX Clips to helps solve everyday problems.

The FLEX Kit includes two FLEX pads and two FLEX Clips which will allow you to connect the FLEX pads together and provides increased surface are

Looking for a strong, reliable, compact and lightweight pulley that is reasonably priced and don-t want to sacrifice efficiency in a mechanical advantage system- Look no further than the TR -Tiny Rescue- Pulley. Few if any other pulleys of comparable size and price range manage to deliver this level of performance and reliability.

This is one of SMC-s best selling steel carabiners. The Large Steel Locking D was developed especially for the needs of the fire and rescue communities with a large gate opening that easily fits over litter rails. The NFPA21001 & NFPA21007 are the models that are stamped with the requisite UL Certification.

Lite Alloy Steel Locking D

The SMC JR (Jigger Rescue) and JRB (JR with becket) double prusik minding pulleys have been designed to be compact, lightweight and cost effective. A key component of every rescue technician-s tool box, the JR and JRB pulleys provide tremendous versatility in the minimalist of ways. Couple the JR with a JRB pulley and you have a lightweight mechanical advantage system that can pull duty in rescue roles from litter tilting to piggy back systems.

The SMC JR (Jigger Rescue) and JRB (JR with becket) double prusik minding pulleys have been designed to be compact, lightweight and cost effective. A key component of every rescue technician-s tool box, the JR and JRB pulleys provide tremendous versatility in the minimalist of ways. Couple the JR with a JRB pulley and you have a lightweight mechanical advantage system that can pull duty in rescue roles from litter tilting to piggy back systems.

The Large Aluminum Locking D is identical in size to our very popular Large Steel Rescue Carabiner except for the fact that it is constructed entirely of aluminum rather than steel. Light in weight, this is a great multipurpose carabiner and an ideal choice for situations such as are found in mountain rescue, where weight is a concern and carabiner volume and strength are equally critical.

The SMC U-Rack Frame is available in two sizes allowing for 4 Bar or 6 Bar configurations. Manufactured from Stainless Steel to provide optimal strength for building your own customized Rappel Rack. Just add the bars you desire and you're ready to go.

The Spire is ideal for multi-pitch climbing, rappelling, and belaying off an anchor or directly off your climbing harness. Designed from the ground up to assure climbers have the most reliable and durable device on the market. The Spire excels at autoblocks, belaying a leader and paying out rope quickly.

The strongest, lightest and most versatile mini-rigging plate on the market! Manufactured on CNC machines using high quality aluminum for strength, durability and corrosion resistance to provide years of reliable service. The SMC Mini-Rigging Plate is designed for use as the collection point for multiple anchors and/or rigging points. The two main holes can also be used as a belay device. Each hole is sized and shaped to facilitate rigging with locking rescue carabiners. Available in two anodized finishes-Blue or Tactical Black, all markings are laser engraved.

Originally designed as a personal escape device to be used by firefighters in bailout situations, this ultra-light and compact descender is now the personal choice of countless members of SAR and Ski Patrol teams, law enforcement and military around the globe. Its compact size and lightweight makes it convenient to pack in a turnout coat or bail-out kit. For that matter just ask the growing number of savvy canyoneers who have chosen it as their descender, knowing that it is optimized for the smaller diameter ropes they've helped become so popular.

The SMC Kinetic Series has been specifically designed for users who require only the best equipment possible, available in NFPA Certified for Work and Rescue environments.

The SMC NFPA Locking D Series carabiner is a true representation of timeless quality and attention to detail. As one of the most versatile mid-sized locking carabiners on the market you will find that form and function are unsurpassed. The enduring design of the SMC Locking D has become a standard in rock climbing, mountaineering and rescue applications as well as in ever increasing industrial applications due to its high strength, light weight, wide gate opening and overall functional versatility.

Easy to rig and handle when wearing gloves, this new compact and lightweight descender has smooth action on belay or rappel. Made with high quality aluminum for optimal strength to weight ratio. Hard coat anodized black for durability and extra resistance to wear and abrasion. Also available in anodized blue for those looking to add some color to their gear rack.

The SMC Kinetic Series has been specifically designed for users who require only the best equipment possible, available in NFPA Certified for Work and Rescue environments and Non-NFPA for Mountaineering and Sport environments.

The SMC FLEX was originally designed for the demanding Technical Fire Rescue market as a canvas replacement. But after using and sharing the FLEX we realized it is much more than just the ultimate in configurable rope management and protection. We realized the FLEX is FLEXible in its uses and the only limitation is your own imagination. The FLEX can be used in a magnitude of configurations providing solutions for an ever growing amount of problems you might face while in the field or around the house. Use a stand alone FLEX or connection multiple FLEX pads with the FLEX Clips to helps solve everyday problems.

The SMC Oval was one of the first aluminum carabiners manufactured in the US during the 1960-s. This classic traditional carabiner is highly versatile and functionally designed to withstand the test of time. A major benefit of using a --true-- oval carabiner is that it is very difficult to load incorrectly. Load forces tend to "self-equalize" between the pulley, ropes and anchors in your system by balancing your load equally on the spine and gate allowing the carabiner to maintain full strength under a variety of conditions.

The SMC Rigging Ring is the strongest aluminum ring of its size in the market and is only limited by your imagination and rigging expertise. The SMC Rigging Ring was designed as the ultimate climbing accessory and can be used in conjunction with anchor systems, haul systems, as a connection point providing that missing link which is often needed. The inside diameter will accommodate up to 3 standard sized carabiners.