EVOLV ADJUST
Home / Shop / Climbing Gear / Lanyards
- Description
- Specifications
Positioning device with two adjustable arms, ideal for aid climbing
The ADJUST rope adjusters have an ergonomic shape that offers quick, precise adjustment
Arms adjust from 15 to 150 cm
The connector is held in position by a rubber ring, to facilitate clipping
Dynamic rope positioning device to reduce the force transmitted to the user in case of a short fall (1)
Used with two locking carabiners of the SPIRIT SCREW-LOCK type
Attaches to the tie-in point(s) of the harness with a girth hitch
This product is not personal protective equipment.
(1) For use below the anchor point: the positioning device does not have an energy absorber. This positioning device must only be used when the potential fall factor is less than 1.
Length: 15 - 150 cm
Weight: 220 g
Material(s): nylon, aluminum, thermoplastic elastomer (TPE)
Related Products
- ￩￫
SPIRIT SCREW-LOCK
CAD $20.00Compact, ultra-lightweight screw-lock carabiner
The SPIRIT SCREW-LOCK is based on the SPIRIT carabiner and uses Petzl's manual screw-lock locking system. This carabiner is designed for specific applications, for example for use at belay stations. It is very compact, and has an H cross section to reduce weight, as well as the Keylock system to avoid the carabiner snagging during maneuvers.Maximum quantity exceededMinimum purchase amount of 0 is required 
Scorpio
CAD $112.00Retractable via ferrata lanyard with progressive tearing energy absorber
The SCORPIO lanyard is designed for via ferrata. It has two arms that are retractable to avoid interfering with movement, and a progressive tearing energy absorber located in a zippered protective pouch, enabling the condition of the absorber to be inspected. The lanyard also has a third arm to facilitate traverses or to allow attachment to a bar (in order to rest, for example).Maximum quantity exceededMinimum purchase amount of 0 is required
Scorpio EASHOOK
CAD $217.39Retractable via ferrata lanyard with progressive tearing energy absorber and EASHOOK carabiners
The SCORPIO EASHOOK lanyard for via ferrata is equipped with two EASHOOK carabiners with wide opening. It has two arms that are retractable to avoid interfering with movement, and a progressive tearing energy absorber enclosed in a zippered protective pouch, allowing the absorber's condition to be inspected. The lanyard also has a third arm to facilitate traverses or to allow attachment to a bar (in order to rest, for example).Maximum quantity exceededMinimum purchase amount of 0 is required- ￩￫
Scorpio Vertigo
CAD $167.60Retractable via ferrata lanyard with progressive tearing energy absorber and VERTIGO WIRE-LOCK carabiners
The SCORPIO VERTIGO lanyard for via ferrata is equipped with two VERTIGO WIRE-LOCK carabiners. It has two arms that are retractable to avoid interfering with movement, and a progressive tearing energy absorber enclosed in a zippered protective pouch, allowing the absorber's condition to be inspected. The lanyard also has a third arm to facilitate traverses or to allow attachment to a bar (in order to rest, for example).Maximum quantity exceededMinimum purchase amount of 0 is required
